TL;DR: Supermarket POS Terminal Board
AndroidSBC supply desk: LPDDR4X and eMMC allocations locked for the WF-P board family serving international market, United States. The WF-P7602 POS Android motherboard spans the triple-screen POS terminal with independent content and eleven sister models in the WF-P series, all built on the RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC with the ARM Mali-G52 MC3 GPU, HDMI plus LVDS plus eDP triple independent output, and Android 14 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to international market and United States importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
WF-P7602 Technical Specifications
| Parameter | AndroidSBC WF-P7602 (triple-screen POS terminal with independent content) | Industry Average |
|---|---|---|
| Processor | RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 8nm | Older 28nm or 40nm process |
| GPU | Mali-G52 MC3 | Older Mali-450 or basic GPU |
| NPU / AI | 6 TOPS | No NPU on competing entry boards |
| Memory | 16GB LPDDR5 | DDR3 1GB / 2GB on competing boards |
| Storage | 128GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | HDMI plus LVDS plus eDP triple independent output | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 14 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P7602 (triple-screen POS terminal with independent content) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For United States importers sourcing the WF-P family, the WF-P7602-A variant is the typical configuration for the hypermarket checkout plus promotion wall use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for United States Buyers
Then there is the fiscal layer. In United States the receipt has to be produced in a form the tax authority recognises, which means the printer handshake, the log retention and the receipt font set have to be right before the first store opens.
AndroidSBC answers the continuity problem with a frozen bill of materials. Each WF-P production lot is built against a fixed BOM and a fixed silicon tier, and the FCC / UL documentation records the actual parts used, so the international market partner re-ordering in a year receives a board that behaves the same way. The 3rd release for international market - 125100 units on September 23, 2026, international market - Shanghai lane - was built against the same reference image the partner qualified, so the lanes went live without a re-test cycle.
WF-P7602 Application Scenarios
The WF-P7602 triple-screen POS terminal with independent content sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P7602-A configuration is the typical build for the hypermarket checkout plus promotion wall use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P7602 drives the cashier screen while the second lane carries the customer display or the promotion wall in international market.
- Convenience and small format stores: the WF-P3399 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P1330 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P6180 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P5270 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in international market: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for international market Buyers
Three tracks exist because international market partners arrive from three directions: as a distributor with stock, as an integrator with a customer, or as a brand owner with a label.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
Whether United States partners take distribution, integration or private label, the WF-P board underneath carries the same serialised test record.
Does the WF-P POS Android motherboard family support a triple-screen POS terminal with independent content?
Answer: Yes. AndroidSBC validates triple-screen POS terminal with independent content on the bench with the actual peripherals the international market partner intends to use, and the result is written into the shipment file.
Which silicon tiers are available in the WF-P family for United States buyers?
Answer: Available tiers are RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. AndroidSBC holds one fixed BOM per lot, so the international market partner always knows which tier is shipping.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: Yes. AndroidSBC validates the exact combination on the Longgang bench using the international market partner printer and scanner models, and the validated configuration is locked as the production reference.
What is the minimum order quantity and the sample lead time for United States?
Answer: For international market buyers the entry point is a single sample board on a 1-3 day lead. Volume follows a 15-30 day production slot, booked against an allocation rather than quoted spot.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. AndroidSBC provides custom Android AOSP builds, custom boot animation and logo, pre-installed apps, custom UI, BSP porting and SDK modules, all built against a frozen BOM.
How are firmware updates delivered to a United States estate after deployment?
Answer: Firmware is delivered over the network or by USB, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the WF-P family.
What shipping terms does AndroidSBC support for United States orders?
Answer: AndroidSBC quotes FOB Shenzhen, CIF and EXW, and handles export customs clearance and global shipping. The international market partner books the lane that suits the import process.
What happens if a board fails in the field in United States?
Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the international market programme so the lane is not down for a full lead time.
Contact AndroidSBC: Start Your WF-P7602 Sourcing Conversation
international market integrators can reach the AndroidSBC export desk for the WF-P POS board family through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to United States buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-P family.
