RK3588 ONNX to RKNN Conversion, WF-RK3588-N3, AndroidSBC, Los Angeles

TL;DR: RK3588 ONNX to RKNN Conversion

LONGGANG, Shenzhen, September 11, 2026 - Wanlin Manufacturing Group confirmed the release of lot 407, a 36,755-unit run of WF-RK3588-N3 boards destined for Los Angeles, United States, after the lot cleared the burn-in rack and the pre-shipment bench.

AndroidSBC deployment log from the WF-RK3588 NPU computing fleet serving Los Angeles, United States. One Rockchip RK3588 silicon, nine application variants. The WF-RK3588 line covers edge AI inference, machine vision, robotics, AI NVR, cockpit, 8K signage, kiosk, ARM PC and custom SMARC carrier board work, all built on the same octa-core 8nm platform with 6 TOPS NPU and 8K H.265 video. Every board leaves the Wanlin Longgang plant with a per-lot certification pack and a burn-in record traceable by unit barcode. Buyers in Los Angeles and United States can mix variants inside a single framework agreement.

WF-RK3588-N3 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3588-N3 (AI NVR and Surveillance Analytics) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For United States importers sourcing the WF-Series, the 8GB + 128GB (WF-RK3588-N3-A) variant is the typical configuration for the AI NVR and multi-camera surveillance analytics use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing AI NVR and Surveillance Analytics for United States Buyers

Importers in Los Angeles usually discover the same thing about the ai nvr and surveillance analytics category: the quote is easy and the repeat shipment is not. The Rockchip RK3588 part depends on a specific wafer allocation, and the second and third orders are where a supply chain either holds or quietly slips a quarter. Software continuity is the second trap. A bare Android image boots fine on the bench, so the problem tends to appear only after the Los Angeles customer has taken delivery and the first OTA push fails against the DRM credentials.

For United States specifically, the file travels with the goods. In the United States FCC Part 15 authorisation is required and an FCC ID applies to radio modules, while UL or ETL listing is usually demanded by the retail channel. AndroidSBC prepares the FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing documentation for FCC / UL, attaches the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), and consigns the lot to Port of Los Angeles on the Los Angeles to Yantian lane.

WF-RK3588-N3 Application Scenarios

The WF-RK3588 line fits nine NPU application lanes, with the WF-RK3588-N3 (AI NVR and Surveillance Analytics) as the lead SKU for Los Angeles and United States programmes:

• Smart NVR: WF-RK3588-N3 records 16 PoE+ channels while the NPU tags every frame for downstream search.
• AI video analytics: WF-RK3588-N3 holds multi-model inference on the NPU while the encoder pipeline records at full rate.
• Face recognition terminal: WF-RK3588-N3 runs face recognition plus anti-spoofing on the NPU against the in-store camera feed.
• License plate recognition: WF-RK3588-N3 reads the plate at the gate plus the gate controller on the same board.
• Behaviour analysis: WF-RK3588-N3 flags fall detection and crowd density on the NPU at frame rate.
• Perimeter security: WF-RK3588-N3 watches the fence line plus the night-time low-light feed on the NPU.
• Smart city surveillance: WF-RK3588-N3 aggregates street camera feeds plus the analytics dashboard on one board.
• Traffic monitoring: WF-RK3588-N3 runs plate recognition plus vehicle classification at the intersection cabinet.

Partnership Models for Los Angeles Buyers

For Los Angeles distributors and brand owners, AndroidSBC opens the ai nvr and surveillance analytics line under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Does the WF-RK3588 line run Android or Linux, and what NPU framework stack is supported?

Answer: Both. AndroidSBC prebuilt Android 12 and Android 13 firmware images that boot on every WF-RK3588 variant, with Android 14 builds available on request. Linux distributions (Ubuntu 22.04 LTS, Debian 12, Yocto Kirkstone, Buildroot) load the Rockchip RKNN-Toolkit2 runtime so the 6 TOPS NPU is usable from day one. The same silicon carries the Android build on the WF-RK3588-D5 signage player and the Yocto build on the WF-RK3588-V1 industrial vision processor, which is a deployment breadth that United States importers rarely get from one supplier.

What is the 6 TOPS triple-core NPU on the WF-RK3588 actually used for in production?

Answer: Three workload families, same silicon. Retail analytics on the WF-RK3588-E0, machine-vision defect classification on the WF-RK3588-V1, and 16-channel AI surveillance analytics on the WF-RK3588-N3. The same 6 TOPS triple-core NPU handles all three from a per-lot certified image burned at Longgang. Los Angeles integrators typically pick one workload per variant and let AndroidSBC tune the firmware profile before shipment.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, REACH and IEC 62368-1 paperwork for United States?

Answer: Yes. AndroidSBC ships a Declaration of Conformity plus a Technical File with every lot. The file contains the CE test reports (EN 55032 plus EN 55035 EMC, EN IEC 62368-1 safety), the FCC Part 15 report, the UKCA dossier where relevant, the RoHS 2.0 report, and the REACH declaration, all dated within the prior twelve months. Where a United States market needs an additional national mark, the export desk will confirm coverage before the order is confirmed rather than after.

What are the MOQ and lead time for a first order on the WF-RK3588?

Answer: 5,000 units per shipment on standard configurations, four weeks to sample and six weeks to mass produce. Where a United States partner signs a twelve-month blanket order, the MOQ per release becomes negotiable and the line will accept variant-mixed purchase orders.

Does AndroidSBC support custom Android ROM, custom Linux, or custom NPU model porting?

Answer: Custom ROM, custom Linux, and custom NPU model porting are all part of the ODM tier. That covers proprietary Android services, a locked-down launcher, Ubuntu, Debian, Yocto or Buildroot images, BSP ports for custom carriers, and RKNN-Toolkit2 model quantization from PyTorch, ONNX, TensorFlow or Caffe. Source access is released under NDA, and the Longgang engineering desk carries the port so the partner is not left with an unmodified vendor BSP.

What about software updates and long-term support on the WF-RK3588?

Answer: Wanlin commits to a minimum seven-year supply window across the WF-RK3588 line. Security patches are back-ported across the Android, Ubuntu LTS, Debian LTS and Yocto tracks for as long as the board is in production, and AndroidSBC provides OTA update infrastructure for partners who need to push firmware to field-deployed units. NPU model builds are versioned on the Wanlin side so a partner that re-trains a model can push the new RKNN file through the same OTA channel without a board swap.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements on the WF-RK3588?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-RK3588-N3 unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-RK3588-N3 Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-RK3588. Buyers in Los Angeles and United States looking to source the WF-RK3588-N3 straight from the source factory can use any of the following:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing for United States, administered by FCC / UL, entering at Port of Los Angeles on the Los Angeles to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

The export desk asks for three things on a first enquiry: annual volume, certification scope and Incoterm. Provide those and a per-lot quote plus the WF-RK3588 MOQ matrix comes back within two business days.