TL;DR: RK3588 4x Cortex-A76 2.4GHz
Los Angeles, United States - September 11, 2026. Wanlin Longgang confirmed lot 453 this week: 26,750 WF-RK3588-R2 boards for Los Angeles, United States, released with the per-lot certification pack and a unit-level burn-in record.
AndroidSBC OEM partnership announcement on the WF-RK3588 NPU computing line serving Los Angeles, United States. The line spans edge AI inference at the entry variant through SMARC 2.2 SOM at the carrier-board end, all on the same Rockchip RK3588 silicon with 6 TOPS NPU, 8K H.265 decode and up to 32GB of LPDDR5. AndroidSBC ships the full range from the Wanlin Longgang plant, and Los Angeles buyers can mix variants inside a single framework agreement rather than opening a new supplier file for each deployment.
WF-RK3588-R2 Technical Specifications
| Parameter | AndroidSBC WF-RK3588-R2 (Robotics and AGV AMR Controller) | Industry Average |
|---|---|---|
| Processor | Rockchip RK3588 octa-core 4x Cortex-A76 + 4x Cortex-A55 (8nm) + 6 TOPS NPU | Quad-core Cortex-A55 1.8GHz without NPU |
| Process node | 8nm | 22nm-28nm |
| GPU / AI | Arm Mali-G610 MP4 + 6 TOPS NPU + ROS2 native support | Mali-G52 with 1 TOPS |
| Sensor fusion | 2x 4-lane MIPI CSI cameras plus mmWave radar and IMU over CAN FD | USB camera only |
| Real-time I/O | EtherCAT master plus CAN FD plus RS485 plus servo drive interface | RS232 only |
| Memory | 8GB / 16GB LPDDR4X | LPDDR4 4GB |
| Storage | 64GB eMMC + M.2 NVMe for SLAM maps and ROS2 bags | eMMC 32GB only |
| Wired network | Dual Gigabit Ethernet + 5G / 4G module support for fleet dispatch | 100M single port |
| Expansion | PCIe 3.0 x4 for additional lidar or frame grabber cards | No PCIe expansion |
| Thermal range | Industrial grade -40C to 85C, fanless passive cooling | 0C to 60C commercial |
| OS support | Linux Ubuntu 22.04 with ROS2 Humble plus Debian 12 plus Android 12 / 13 | Vendor BSP only |
| Functional safety | Hardware watchdog plus RTC plus auto power-on after failure | Watchdog only |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3588-R2 (Robotics and AGV AMR Controller) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For United States importers sourcing the WF-Series, the 8GB + 64GB (WF-RK3588-R2-A) variant is the typical configuration for the robotics controller and AGV AMR compute use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.
Challenges in Sourcing Robotics and AGV AMR Controller for United States Buyers
Buyers in Los Angeles who have sourced a robotics and agv amr controller for a few seasons tend to separate two questions: can the factory hold the price, and can it hold the allocation. The second one is harder. The Rockchip RK3588 is allocated at wafer level, and a 26,750-unit order placed against trader stock is the order most likely to slip a quarter without anyone warning the buyer. The second issue is firmware, not hardware. Vendors promise the full certified software stack and then ship a bare AOSP image, and the failure only surfaces at the warehouse when the unit is powered on against the customer's app.
The third exposure is paperwork. Factories that stamp marks without holding the underlying test reports leave the importer to produce a Technical File after the fact, which is exactly when the container is sitting in a bonded yard. The answer AndroidSBC applies is to close the gap at the source. Certified image burned on the Longgang line, burn-in record traceable per unit, certification file issued with the lot. The nine WF-RK3588 variants span robotics controller, service robot motherboard, AGV control, AMR autonomous mobile robot, quadruped robot, delivery robot, cleaning robot, SLAM navigation, robot vision fusion, and ROS2 compute node and each carries three memory configurations, which keeps most United States requirements on a standard SKU rather than a custom run.
Compliance for United States is handled at the factory rather than after arrival. In the United States FCC Part 15 authorisation is required and an FCC ID applies to radio modules, while UL or ETL listing is usually demanded by the retail channel. The Longgang export desk builds the destination-market file for FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing administered by FCC / UL and issues it alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the shipment booked into Port of Los Angeles on the Los Angeles to Yantian lane.
WF-RK3588-R2 Application Scenarios
The WF-RK3588 line fits nine NPU application lanes, with the WF-RK3588-R2 (Robotics and AGV AMR Controller) as the lead SKU for Los Angeles and United States programmes:
- Service robot motherboard: WF-RK3588-R2 drives the 360-degree vision fusion plus the speech pipeline on the same NPU.
- AGV control board: WF-RK3588-R2 holds the SLAM front-end while the EtherCAT master drives the wheel controllers.
- AMR autonomous mobile robot: WF-RK3588-R2 keeps a stable frame interval even when the SLAM map exceeds 100k landmarks.
- Quadruped robot: WF-RK3588-R2 runs the gait controller plus the perception stack on one octa-core cluster.
- Delivery robot: WF-RK3588-R2 holds the elevator interface plus the obstacle model on the same board.
- Cleaning robot: WF-RK3588-R2 fuses mmWave radar with the vision input to detect glass and dark obstacles.
- SLAM navigation: WF-RK3588-R2 ingests two MIPI CSI feeds plus the IMU at the full SLAM rate.
- ROS2 compute node: WF-RK3588-R2 runs the perception, planning, and control nodes on the same silicon with hardware isolation.
Partnership Models for Los Angeles Buyers
AndroidSBC runs three engagement tiers for United States importers and brand owners sourcing a robotics and agv amr controller on the WF-RK3588 line:
- OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
- ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
- Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.
Does the WF-RK3588 line run Android or Linux, and what NPU framework stack is supported?
Answer: Both. AndroidSBC prebuilt Android 12 and Android 13 firmware images that boot on every WF-RK3588 variant, with Android 14 builds available on request. Linux distributions (Ubuntu 22.04 LTS, Debian 12, Yocto Kirkstone, Buildroot) load the Rockchip RKNN-Toolkit2 runtime so the 6 TOPS NPU is usable from day one. The same silicon carries the Android build on the WF-RK3588-D5 signage player and the Yocto build on the WF-RK3588-V1 industrial vision processor, which is a deployment breadth that United States importers rarely get from one supplier.
What is the 6 TOPS triple-core NPU on the WF-RK3588 actually used for in production?
Answer: Three workloads that have already shipped at scale. On the WF-RK3588-E0 the NPU drives retail analytics (people counting, dwell time, demographic classification) at 25fps per stream. On the WF-RK3588-V1 the same silicon runs machine-vision defect classification at line speed on a factory floor. On the WF-RK3588-N3 it carries 16-channel AI surveillance analytics (person, vehicle, behaviour) on a fanless board. Each variant is tuned for its workload, but the silicon is the same, and that is what makes one supplier file cover nine deployment categories for United States buyers.
Can AndroidSBC handle CE, FCC, UKCA, RoHS, REACH and IEC 62368-1 paperwork for United States?
Answer: Yes. AndroidSBC ships a Declaration of Conformity plus a Technical File with every lot. The file contains the CE test reports (EN 55032 plus EN 55035 EMC, EN IEC 62368-1 safety), the FCC Part 15 report, the UKCA dossier where relevant, the RoHS 2.0 report, and the REACH declaration, all dated within the prior twelve months. Where a United States market needs an additional national mark, the export desk will confirm coverage before the order is confirmed rather than after.
What are the MOQ and lead time for a first order on the WF-RK3588?
Answer: 5,000 units per shipment on standard configurations, four weeks to sample and six weeks to mass produce. Where a United States partner signs a twelve-month blanket order, the MOQ per release becomes negotiable and the line will accept variant-mixed purchase orders.
Does AndroidSBC support custom Android ROM, custom Linux, or custom NPU model porting?
Answer: Custom ROM, custom Linux, and custom NPU model porting are all part of the ODM tier. That covers proprietary Android services, a locked-down launcher, Ubuntu, Debian, Yocto or Buildroot images, BSP ports for custom carriers, and RKNN-Toolkit2 model quantization from PyTorch, ONNX, TensorFlow or Caffe. Source access is released under NDA, and the Longgang engineering desk carries the port so the partner is not left with an unmodified vendor BSP.
What about software updates and long-term support on the WF-RK3588?
Answer: Wanlin commits to a minimum seven-year supply window across the WF-RK3588 line. Security patches are back-ported across the Android, Ubuntu LTS, Debian LTS and Yocto tracks for as long as the board is in production, and AndroidSBC provides OTA update infrastructure for partners who need to push firmware to field-deployed units. NPU model builds are versioned on the Wanlin side so a partner that re-trains a model can push the new RKNN file through the same OTA channel without a board swap.
Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?
Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.
How does AndroidSBC handle RMA or DOA replacements on the WF-RK3588?
Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-RK3588-R2 unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in record, partners typically receive a root-cause note with the replacement rather than a silent credit.
Contact AndroidSBC: Start Your WF-RK3588-R2 Sourcing Conversation
The AndroidSBC export desk handles all WF-RK3588 enquiries from Los Angeles and United States. Direct factory contact for the robotics and agv amr controller is available through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Destination market file: FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing for United States, administered by FCC / UL, entering at Port of Los Angeles on the Los Angeles to Yantian lane
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For an OEM or ODM conversation, it helps to state the target annual volume, the certification scope required (CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, UL 60950-1 or EN 55032 plus EN 55035), and the preferred Incoterm (FOB Yantian, FOB Shekou, CIF, DDP, or DDP-Amazon). The export team returns a per-lot quote plus the variant-by-variant MOQ matrix for the WF-RK3588 line within two business days.
