RK3588 6 TOPS NPU, WF-RK3588-V1, AndroidSBC, Los Angeles

TL;DR: RK3588 6 TOPS NPU

SHENZHEN, China, September 11, 2026 - Wanlin Manufacturing Group pushed lot 119 of the WF-RK3588-V1 board out of the Longgang plant this week, 8,190 units for Los Angeles, United States, with the export declaration naming Longgang as the place of origin.

AndroidSBC unveils the nine-variant WF-RK3588 NPU computing line spanning edge AI, machine vision, robotics, AI NVR, cockpit, 8K signage, kiosk, ARM PC and SMARC SOM serving Los Angeles, United States. AndroidSBC is releasing the full WF-RK3588 NPU computing line for Los Angeles and United States: nine variants built on the Rockchip RK3588 octa-core 6 TOPS NPU platform, covering edge AI inference, industrial machine vision, robotics and AMR controllers, AI NVR with analytics, smart cockpit, 8K digital signage, kiosk and POS, ARM PC and mini-PC, plus the SMARC 2.2 SOM for carrier-board work. The line ships from the Wanlin Longgang facility with OEM branding, ODM carrier work, and per-lot CE, FCC, UKCA, RoHS and IEC 62368-1 documentation handled in-house.

WF-RK3588-V1 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3588-V1 (Industrial AI Machine Vision Processor) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For United States importers sourcing the WF-Series, the 8GB + 64GB (WF-RK3588-V1-A) variant is the typical configuration for the industrial AI machine vision and inspection use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Industrial AI Machine Vision Processor for United States Buyers

The industrial ai machine vision processor sourcing question that Los Angeles distributors keep coming back to is continuity across quarters. The Rockchip RK3588 requires a dedicated wafer slot, and a 8,190-unit order placed against broker inventory often turns into a two-month slip with no warning. Then comes the software layer. A board that boots is not a board that holds a certified stack under a 72-hour loop, and United States buyers typically find the difference in their own warehouse rather than at the factory.

Documentation closes the list. Buyers in Los Angeles have learned to request the test reports before releasing the deposit, because a mark printed on a carton carries no weight at the port if the Technical File behind it does not exist. AndroidSBC handles it by doing the software burn and the documentation at the factory: every lot leaves Longgang with the certified image loaded, a unit-level burn-in barcode, and a Technical File that carries the test reports. The nine WF-RK3588 variants cover industrial AI vision inspection, machine vision processor, AOI defect detection, SMT optical inspection, dimension measurement, print inspection, textile inspection, surface flaw detection, AI vision box, and quality control terminal with three memory configurations each, which means a Los Angeles integrator can usually match a customer requirement without a custom run.

For United States specifically, the file travels with the goods. In the United States FCC Part 15 authorisation is required and an FCC ID applies to radio modules, while UL or ETL listing is usually demanded by the retail channel. AndroidSBC prepares the FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing documentation for FCC / UL, attaches the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), and consigns the lot to Port of Los Angeles on the Los Angeles to Yantian lane.

WF-RK3588-V1 Application Scenarios

The WF-RK3588 line fits nine NPU application lanes, with the WF-RK3588-V1 (Industrial AI Machine Vision Processor) as the lead SKU for Los Angeles and United States programmes:

• AOI defect detection: WF-RK3588-V1 inspects the solder paste and the component placement at the SMT line.
• Dimension measurement: WF-RK3588-V1 measures feature sizes against the calibration board stored on the M.2 NVMe.
• Print inspection: WF-RK3588-V1 reads the print quality of labels and cartons at line speed.
• Textile inspection: WF-RK3588-V1 holds a defect model that flags yarn breaks and weave errors on the loom.
• Surface flaw detection: WF-RK3588-V1 watches a moving sheet for cracks and inclusions against a reference image.
• Quality control terminal: WF-RK3588-V1 displays the pass or fail result on the operator console via HDMI 2.1.
• AI vision box: WF-RK3588-V1 hosts the inspection loop behind the production line rather than at a separate workstation.
• Multi-camera AOI: WF-RK3588-V1 ingests two camera feeds in parallel through the dual MIPI CSI interface.

Partnership Models for Los Angeles Buyers

The WF-RK3588 line is available to United States partners through three routes, and they can be mixed inside one agreement:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Does the WF-RK3588 line run Android or Linux, and what NPU framework stack is supported?

Answer: Both. AndroidSBC prebuilt Android 12 and Android 13 firmware images that boot on every WF-RK3588 variant, with Android 14 builds available on request. Linux distributions (Ubuntu 22.04 LTS, Debian 12, Yocto Kirkstone, Buildroot) load the Rockchip RKNN-Toolkit2 runtime so the 6 TOPS NPU is usable from day one. The same silicon carries the Android build on the WF-RK3588-D5 signage player and the Yocto build on the WF-RK3588-V1 industrial vision processor, which is a deployment breadth that United States importers rarely get from one supplier.

What is the 6 TOPS triple-core NPU on the WF-RK3588 actually used for in production?

Answer: Three workloads that have already shipped at scale. On the WF-RK3588-E0 the NPU drives retail analytics (people counting, dwell time, demographic classification) at 25fps per stream. On the WF-RK3588-V1 the same silicon runs machine-vision defect classification at line speed on a factory floor. On the WF-RK3588-N3 it carries 16-channel AI surveillance analytics (person, vehicle, behaviour) on a fanless board. Each variant is tuned for its workload, but the silicon is the same, and that is what makes one supplier file cover nine deployment categories for United States buyers.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, REACH and IEC 62368-1 paperwork for United States?

Answer: Yes, and the file travels with the goods rather than behind them. The pack covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with test reports dated within the prior year. AndroidSBC will also advise on any United States-specific addition during quotation, which is the point at which the answer is still useful.

What are the MOQ and lead time for a first order on the WF-RK3588?

Answer: 5,000 units per shipment on standard configurations, four weeks to sample and six weeks to mass produce. Where a United States partner signs a twelve-month blanket order, the MOQ per release becomes negotiable and the line will accept variant-mixed purchase orders.

Does AndroidSBC support custom Android ROM, custom Linux, or custom NPU model porting?

Answer: Custom ROM, custom Linux, and custom NPU model porting are all part of the ODM tier. That covers proprietary Android services, a locked-down launcher, Ubuntu, Debian, Yocto or Buildroot images, BSP ports for custom carriers, and RKNN-Toolkit2 model quantization from PyTorch, ONNX, TensorFlow or Caffe. Source access is released under NDA, and the Longgang engineering desk carries the port so the partner is not left with an unmodified vendor BSP.

What about software updates and long-term support on the WF-RK3588?

Answer: Wanlin commits to a minimum seven-year supply window across the WF-RK3588 line. Security patches are back-ported across the Android, Ubuntu LTS, Debian LTS and Yocto tracks for as long as the board is in production, and AndroidSBC provides OTA update infrastructure for partners who need to push firmware to field-deployed units. NPU model builds are versioned on the Wanlin side so a partner that re-trains a model can push the new RKNN file through the same OTA channel without a board swap.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements on the WF-RK3588?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-RK3588-V1 unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit burn-in record means the failure report usually carries a root cause alongside the replacement, which is what a United States integrator running a production line actually needs.

Contact AndroidSBC: Start Your WF-RK3588-V1 Sourcing Conversation

Wanlin Manufacturing Group sells the WF-RK3588 NPU computing line overseas through AndroidSBC. Los Angeles and United States importers, brand owners and channel distributors who want to source the industrial ai machine vision processor direct from the Longgang plant can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing for United States, administered by FCC / UL, entering at Port of Los Angeles on the Los Angeles to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To speed up an OEM or ODM review, include the target volume, the certification scope you need, and your preferred Incoterm. With those three in hand, AndroidSBC returns a per-lot quotation and the MOQ matrix across the nine WF-RK3588 variants within two business days.