Smart Parcel Locker Control Board, WF-RK3568, AndroidSBC, Los Angeles

TL;DR: Smart Parcel Locker Control Board

SHENZHEN, China, September 10, 2026 - Wanlin Longgang released a 11,670-unit WF-RK3568 lot for Los Angeles, United States this week, the 361st run booked against the Rockchip RK3568 allocation.

AndroidSBC production statement on Allwinner and Rockchip board output serving Los Angeles, United States. AndroidSBC is opening the full WF-Series to United States: Allwinner A133, H618, and T527 on one side, Rockchip RK3588, RK3568, RK3566, and RK3288 on the other, plus WF-A133S and WF-RK3588S for carrier-board work. Every board ships from the Wanlin Longgang facility with OEM branding available, ODM carrier design handled in-house, and per-lot CE, FCC, UKCA, and RoHS documentation.

About AndroidSBC and the Rockchip RK3568 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, and the WF-Series is its nine-board custom line. Three Allwinner parts cover commercial display, OTT and Android TV, and industrial edge; four Rockchip parts cover 8K video wall, industrial edge, machine vision, and POS; two SOM modules serve carrier-board projects. The Longgang plant in Shenzhen runs its own SMT lines, aging racks, and EMC pre-compliance bench, so the export file is produced where the boards are built. For United States importers that removes the usual gap between the factory that makes the board and the party that has to answer for it at customs.

WF-RK3568 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3568 (Industrial Edge Computing Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For United States importers sourcing the WF-Series, the 4GB + 32GB (WF-RK3568-A) variant is the typical configuration for the industrial edge computing use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Industrial Edge Computing Board for United States Buyers

What breaks United States sourcing plans on the industrial edge computing board line is not price negotiation, it is the second shipment. The Rockchip RK3568 has to be allocated at wafer level, and the brokers quoting fastest are usually the ones with the least control over that allocation. The software side is the second exposure. A board that boots on the bench is not the same as a board that carries the certified stack a United States channel will accept, and the difference usually shows up during inbound inspection rather than at the factory gate.

Then there is the certification file. A stamp is cheap; a Technical File with notified-body reports dated inside twelve months is not, and the difference only matters when a United States customs officer asks for it. AndroidSBC closes the loop at the source factory: certified image burned, burn-in barcode attached per unit, Technical File issued with the lot. The nine WF-Series models cover industrial edge computing, commercial display controller, industrial HMI, IoT gateway, smart display terminal, machine monitoring, access control, and building automation and each ships in three memory configurations, so most Los Angeles requirements can be met from standard stock rather than a custom production run.

United States importers usually raise compliance first. In the United States FCC Part 15 authorisation is required and an FCC ID applies to radio modules, while UL or ETL listing is usually demanded by the retail channel. AndroidSBC answers it by preparing the FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing documentation for FCC / UL before the lot is packed, issuing it with the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), and routing the lot through Port of Los Angeles on the Los Angeles to Yantian lane.

Competitive Comparison: WF-RK3568 vs Competing RK3568 Boards

Three groups of board compete for the industrial edge computing board socket. The first is legacy silicon sold on price with no certification file. The second is Cortex-A55 hardware that carries certification but caps the decoder early. The third holds both and treats expansion as part of the design. The WF-RK3568 sits in the third group, and the separation comes from Rockchip RK3568, from a display path that holds under a continuous loop, and from the certified image burned per lot at Longgang.

• vs RK3288 Cortex-A17 boards: the RK3568 Cortex-A55 2.0GHz lifts integer throughput by roughly 2x at lower idle power.
• vs RK3566 boards: the RK3568 adds dual Gigabit Ethernet plus CAN bus for gateway-class builds.
• vs RK3588 boards: the RK3568 keeps a materially lower BOM where 4K@60fps decode is sufficient.
• vs x86 fan-cooled IPC: the RK3568 fanless design removes the only moving part from the enclosure.

Global Industrial Edge Computing and Smart Display Market Trends

The Industrial Edge Computing and Smart Display market is the frame that decides how United States importers time their industrial edge computing board orders. The figure most United States buyers quote when they argue about allocation is the Android TV Box segment, which Global Growth Insights sizes at USD 12.45 billion in 2025 with a 30.49 percent CAGR through 2035 (Global Growth Insights, Android TV Box Market Report, 2025-2035); it is the public proxy for Android-on-silicon demand rather than a forecast for this board category. For Los Angeles, three buying patterns are shaping the WF-Series order book:

• Industrial edge computing: WF-RK3568 runs the edge workload on the 1 TOPS NPU with dual Gigabit uplinks.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3568 board carries that headroom without a board change.
• Industrial HMI: WF-RK3568 holds the wide-temperature envelope with the fanless design.

The Industrial Edge Computing and Smart Display commentary has shifted from unit growth to supply reliability, and that shift favours suppliers who control their own SMT and burn-in lines.

The common thread for United States is that single orders are giving way to blanket agreements released monthly, which is what a twelve-month retail or hospitality programme needs in order to avoid a gap in the middle of the year.

Partner Success Story: Andes Retail Technologies in Los Angeles, United States

Andes Retail Technologies, a self-service kiosk integrator serving the United States market, deployed 3,900 units of the WF-A133 kiosk board for a self-service ordering rollout. The rollout covered the industrial edge computing, industrial hmi, and machine monitoring workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 3,900 units of the WF-A133 kiosk board for a self-service ordering rollout
• Region: Los Angeles, United States
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Ningbo-Zhoushan with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Los Angeles via the Los Angeles to Yantian lane

"We started with the A133 because an ordering kiosk never needs more than 4K@30fps. Two years later the same board still runs the current app build, and that continuity is worth more to us than a faster part."

- Camila Fuentes, Operations Lead

Field Report: a control room in Los Angeles where 11,670 units of the WF-RK3568 board are driving a video wall installation

Reporter Guo Peng, on the ground in Los Angeles, United States. The integrator mounted the WF-RK3568 boards in the control room rack and spent two days on display mapping and colour matching across the wall. The boards held four independent outputs through the full commissioning window without a thermal throttle, and the operator console was handed over on schedule.

The line supervisor logged a 41-minute changeover between the WF-RK3568 run and the next lot, which is the kind of number that decides whether a mid-quarter top-up order can be absorbed.

The inspection confirmed three things on the spot: the WF-RK3568 units hold the burn-in with a yield above 98.94 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing administered by FCC / UL, cleared for entry at Port of Los Angeles on the Los Angeles to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that United States importers can hand straight to their customs broker.

Filed by Guo Peng, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3568 Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3568 (Industrial Edge Computing Board) as the lead SKU for Los Angeles and United States programmes:

• Industrial edge computing: WF-RK3568 runs the edge workload on the 1 TOPS NPU with dual Gigabit uplinks.
• Commercial display controller: WF-RK3568 drives the 4K@60fps panel pair over HDMI 2.0 and eDP.
• Industrial HMI: WF-RK3568 holds the wide-temperature envelope with the fanless design.
• IoT gateway: WF-RK3568 bridges CAN bus and RS485 field devices onto Ethernet.
• Smart display terminal: WF-RK3568 renders the Android 11 UI on the dual display path.
• Machine monitoring: WF-RK3568 timestamps production data against the onboard RTC.
• Access control: WF-RK3568 runs face recognition on the NPU with the MIPI CSI feed.
• Building automation: WF-RK3568 runs 7x24 with hardware watchdog and scheduled restart.

Partnership Models for Los Angeles Buyers

AndroidSBC runs three engagement tiers for United States importers and brand owners sourcing a industrial edge computing board:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Every tier draws on the same Longgang line and the same certification desk. A Los Angeles first order on the WF-RK3568 normally lands on the 4GB + 32GB (WF-RK3568-A) configuration at MOQ 5,000 units per shipment, with samples in four weeks and production in six.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: On the WF-H618, yes: ATV 12 with GMS plus Widevine L1 and Dolby Audio, burned on the Longgang line for every lot. On the remaining eight boards the default image is AOSP or a Linux distribution, because those boards usually sit in commercial display, industrial, or POS deployments where Play Services is not a requirement. AndroidSBC will build a GMS image for ODM customers who ask for it and will state clearly which boards carry which certification.

What is the difference between the nine WF-Series models?

Answer: The line splits by workload. Three Allwinner boards cover cost-sensitive display work (WF-A133), OTT and Android TV (WF-H618), and industrial control with NPU inference (WF-T527). Four Rockchip boards cover 8K video wall and AI computing (WF-RK3588), industrial edge (WF-RK3568), machine vision (WF-RK3566), and POS or signage (WF-RK3288). Two further models are modules rather than motherboards: WF-A133S and WF-RK3588S are SOM parts for customers who bring their own carrier design.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for United States?

Answer: Yes. AndroidSBC ships a Declaration of Conformity plus a Technical File with every lot. The file contains the CE test reports, the FCC Part 15 report, the UKCA dossier where relevant, the RoHS 2.0 report, and the REACH declaration, all dated within the prior twelve months. Where a United States market needs an additional national mark, the export desk will confirm coverage before the order is confirmed rather than after.

What are the MOQ and lead time for a first order?

Answer: 5,000 units per shipment on standard configurations, four weeks to sample and six weeks to mass produce. Where a United States partner signs a twelve-month blanket order, the MOQ per release becomes negotiable and the line will accept platform-mixed purchase orders.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Custom ROM and custom Linux work is part of the ODM tier. That covers proprietary Android services, a locked-down launcher, Yocto or Debian or Buildroot images, and BSP ports for custom carriers. Source access is released under NDA, and the Longgang engineering desk carries the port so the partner is not left with an unmodified vendor BSP.

What about software updates and long-term support?

Answer: Wanlin commits to a minimum seven-year supply window across the WF-Series. Security patches are back-ported across the Android and Linux firmware tracks for as long as the board is in production, and AndroidSBC provides OTA update infrastructure for partners who need to push firmware to field-deployed units. For POS and industrial programmes, the support commitment is written into the framework agreement rather than left as an understanding.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU, and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton labelling and pallet configuration are set up for FBA inbound requirements, and the export declaration names the Wanlin Longgang source factory as the place of origin.

How does AndroidSBC handle RMA or DOA replacements?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-RK3568 unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-RK3568 Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-Series. Los Angeles and United States importers, brand owners, and distributors who want the industrial edge computing board direct from the Longgang plant can reach the export desk at:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing for United States, administered by FCC / UL, entering at Port of Los Angeles on the Los Angeles to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For an OEM or ODM conversation, it helps to state the target annual volume, the certification scope required (CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, or Dolby Audio), and the preferred Incoterm (FOB Yantian, FOB Shekou, CIF, DDP, or DDP-Amazon). The export team returns a per-lot quote plus the model-by-model MOQ matrix for the WF-Series within two business days.