TL;DR: AndroidSBC Launches Factory-Direct Supply Program for Los Angeles RK3588 Board Buyers
Featured device this report: ASBC-IO800 RK3588 automotive CAN FD board - CAN FD Wide Temp; 8GB LPDDR4X; 128GB eMMC 5.1; 6 TOPS NPU for DMS driver monitoring and AVM stitching; Up to seven independent screens on one chip: cluster, center, passenger, roof, mirrors. Full spec table below.
Published by Wanlin Manufacturing Group (AndroidSBC Brand) | Last updated: September 02, 2026 | Expertise: 15+ years ARM embedded board manufacturing
ASBC-IO800 Technical Specifications
| Parameter | AndroidSBC ASBC-IO800 (RK3588 automotive CAN FD board) | Industry Average |
|---|---|---|
| SoC and CPU | Rockchip RK3588M automotive-grade octa-core (4x Cortex-A76 + 4x Cortex-A55), 8nm | Quad-core A55 boards or older 12nm SoCs |
| NPU AI acceleration | 6 TOPS NPU for DMS driver monitoring and AVM stitching | No NPU or external accelerator required |
| GPU | ARM Mali-G610 MP4, multi-layer HMI compositing | Dual-core entry GPUs, no Vulkan 1.2 |
| Memory | 8GB LPDDR4X | 2-4GB soldered, no high-capacity options |
| Storage | 128GB eMMC 5.1 | 8-32GB eMMC, no NVMe or SATA expansion |
| Video decode and encode | 8K@60fps decode, multi-camera AVM surround view with real-time stitching | 4K@30fps decode ceiling |
| Interface variant | CAN FD Wide Temp | Fixed port set, no configuration ladder |
| SATA storage interface | N/A | No SATA or single SATA 2.0 port |
| Serial interface | RS232/RS485/TTL on selected models | 1-2 RS232 ports, no isolation |
| CAN bus interface | 3x CAN FD channels up to 5Mbps, automotive-grade transceivers, isolation protection, fault monitoring | No CAN or uncertified transceivers |
| Expansion interface | PCIe and GPIO on selected models | No PCIe, limited GPIO |
| Display output | Up to seven independent screens on one chip: cluster, center, passenger, roof, mirrors | Single HDMI 2.0 output |
| Network | Gigabit Ethernet, WiFi 6, Bluetooth 5.2, 4G/5G M.2, GNSS/GPS positioning | Single Ethernet, WiFi 4/5 |
| USB interface | USB 2.0/3.0 combo | Limited USB 2.0 ports |
| Operating system | Android Automotive-style AOSP build or Linux, dual-OS support | Uncertified AOSP builds, stale BSP |
| Operating temperature | -40 to 85 C automotive operating range, AEC-Q100 aligned design | 0-60 C commercial only, fan required |
| Power and reliability | 9-18V vehicle DC, crank-ready, watchdog, RTC, scheduled wake, ignition sense | No watchdog, manual restart required |
| Form factor | 170 x 125 mm, vehicle harness connector layout | Non-standard layouts, poor chassis fit |
| Variant note | fleet telematics SKU with SATA logging | Single SKU, no configuration ladder |
Challenges in RK3588 Interface Board Sourcing
| Sourcing challenge | Industry problem | AndroidSBC solution |
|---|---|---|
| Interface spec vs delivered hardware mismatch | Boards advertised with 2x SATA or 6x COM arrive with fewer usable ports, shared lanes, or silent dropouts under load, discovered only during commissioning | Every SKU ships with a printed port map matching the board silkscreen; SATA and serial ports are load-tested during 72-hour burn-in and the verified port count is stated on the packing file |
| Missing isolation on RS485 and CAN | Unisolated serial and bus ports fail on factory floors, in vehicles, and next to VFDs, taking out sensors and controllers connected to the same line | RS485 and CAN transceivers with isolation protection and ESD hardening are standard on industrial SKUs, with isolation test reports bundled in every shipment |
| Interface driver and BSP gaps | Boards ship with Android or Linux images that do not include kernel modules for the extra SATA, CAN, or serial chips, forcing integrators to write drivers | In-house BSP team maintains Android 12-15, Debian, Ubuntu, Yocto, and Buildroot images with all on-board interface drivers included, plus 24-hour engineering response |
| Customization dead ends for port configurations | Most factories refuse interface changes below huge volumes, forcing buyers to use external adapters and splitters that add failure points | Custom SATA port count, CAN channel count, serial port count, and display interface configuration from 1,000 units with 5-week NRE cycles |
| Certification and import documentation gaps | Missing FCC, CE, RoHS, or radio files cause customs holds and project delays, especially for WiFi 6 and 5G module variants | Pre-tested module combinations, complete CE/FCC/RoHS/UL/GMS/EDLA documentation with every order, and HS code and customs paperwork support for destination markets |
AndroidSBC RK3588 Interface Board Application Scenarios
| Scenario | Recommended models | Key interfaces |
|---|---|---|
| NAS and local storage servers | ASBC-IO100, ASBC-IO900, ASBC-IO600 | 2x-6x SATA 3.0, M.2 NVMe, software RAID, dual GbE or 2.5G |
| Factory automation and HMI | ASBC-IO200, ASBC-IO700, ASBC-IO300 | 4x-10x COM, RS485 isolation, Modbus TCP/RTU, CAN FD, 9-36V wide input |
| Robotics, AGV, and AMR | ASBC-IO300, ASBC-IO800, ASBC-IO700 | CAN FD motor bus, 8x MIPI-CSI vision, ROS 2, dual GbE, GPS/BeiDou |
| Digital signage and video walls | ASBC-IO400, ASBC-IO500, ASBC-IO900 | Dual HDMI 2.1 8K, DP 1.4, LVDS/eDP/MIPI, GMS/EDLA, HDMI input |
| Self-service kiosks and POS | ASBC-IO500, ASBC-IO700, ASBC-IO200 | 8x USB, RS232 printer support, dual SIM, WiFi 6, PoE option |
| NVR and video surveillance | ASBC-IO100, ASBC-IO600, ASBC-IO900 | SATA 3.0 storage pools, 16-channel decode, RS485 PTZ, RAID support |
| Smart cockpit and fleet | ASBC-IO800 | 3x CAN FD, -40 to 85 C, seven-screen drive, DMS/AVM on NPU |
| Edge AI and machine vision | ASBC-IO600, ASBC-IO400 | PCIe 3.0 x4, 6 TOPS NPU, RKNN/ONNX toolchains, M.2 NVMe |
Partnership Models for Los Angeles Buyers
1. Distributor and Reseller Wholesale
For industrial distributors, signage resellers, and online sellers in Los Angeles and United States. Volume pricing tiers from 100 units, 1-3 day samples, 15-30 day production, dropshipping support, and regional allocation with reserved RK3588 supply slots.
2. OEM and ODM Custom Board Partnership
For brands and system builders in Los Angeles creating differentiated hardware. Custom SATA port count, CAN channel count, serial port count, display interface configuration, and carrier board design from 1,000 units with 5-week NRE cycles, custom PCBA, per-market radio modules, boot animation, pre-installed applications, AOSP and Linux BSP ownership, and custom packaging.
3. Cross-Border Trader and Sourcing Agent Programs
For trading companies, sourcing agents, and import brokers in Los Angeles and United States seeking a reliable Chinese source factory for RK3588 interface boards. We provide complete export solutions: EXW, FOB, CIF, and DDP shipping terms, CE/FCC/RoHS/GMS/EDLA documentation, HS code and customs paperwork, neutral packaging, and commission-based or volume-based partnership structures for long-term trade cooperation.
4. System Integrator Framework Programs
Q: What interface options do AndroidSBC RK3588 boards offer?
A: The 9-model line covers SATA 3.0 storage (2x-6x ports with hot-swap and RAID), multi-serial ports (4x-10x RS232/RS485/TTL with isolation), CAN FD bus (1x-3x channels up to 5Mbps with isolated transceivers), dual Gigabit Ethernet, HDMI 2.1 8K display outputs, PCIe 3.0 expansion, and 4x-8x USB ports. The featured ASBC-IO800 in this report ships with CAN FD Wide Temp, 8GB LPDDR4X, and 128GB eMMC 5.1.
Q: Can AndroidSBC customize the port configuration on my boards?
A: Yes. OEM/ODM customization starts at 1,000 units with custom SATA port count, CAN channel count, serial port count, and display interface configuration, plus custom carrier board design completed in roughly 5 weeks including NRE cycles. We handle custom PCBA, per-market radio modules, isolation options, boot animation, pre-installed applications, AOSP and Linux BSP builds, and custom packaging.
Q: What is the MOQ and lead time for Los Angeles buyers?
A: MOQ starts at 100 units for wholesale, 1,000 units for custom carrier board projects. Samples ship in 1-3 days, mass production runs 15-30 days. CE/FCC/RoHS/GMS/EDLA documentation is included with every shipment, and dropshipping is available for e-commerce partners in Los Angeles and United States.
Q: What is the full AndroidSBC RK3588 interface board product line?
A: AndroidSBC manufactures a complete 9-model line: ASBC-IO100 (ASBC-IO100 RK3588 SATA storage expansion board); ASBC-IO200 (ASBC-IO200 RK3588 multi-serial industrial board); ASBC-IO300 (ASBC-IO300 RK3588 CAN bus control board); ASBC-IO400 (ASBC-IO400 RK3588 multi-display interface board); ASBC-IO500 (ASBC-IO500 RK3588 network and USB board); ASBC-IO600 (ASBC-IO600 RK3588 PCIe and GPIO expansion board); ASBC-IO700 (ASBC-IO700 RK3588 full-I/O industrial control board); ASBC-IO800 (ASBC-IO800 RK3588 automotive CAN FD board); ASBC-IO900 (ASBC-IO900 RK3588 flagship NAS storage board). All models are available with custom branding, regional radio certifications, and destination-market documentation.
Q: Can trading companies and sourcing agents in Los Angeles work with AndroidSBC?
A: Yes. We are a source factory supporting cross-border traders and import agents with EXW, FOB, CIF, and DDP export terms, complete CE/FCC/RoHS/GMS/EDLA and customs documentation including HS codes, neutral or custom packaging, and volume-based partnership pricing. We welcome long-term trade cooperation from United States.
Contact AndroidSBC: Start Your RK3588 Interface Board Wholesale Order
For wholesale pricing, sample requests, OEM customization, certification documentation, and partnership discussions in Los Angeles and United States:
- Email: Androidsbc@163.com
- Export Hotline: +8613261677119
- Website: www.androidsbc.com
- Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
