TL;DR: AndroidSBC Launches Factory-Direct Supply Program for Los Angeles Advertising Machine and Display Integrators
Featured device this report: ASBC-X9S ultra-low-power signage board - Allwinner A133 quad-core Cortex-A53 1.6GHz, 22nm process, PowerVR GE8300 GPU; 2GB LPDDR4 + 16GB eMMC storage with Android 10 with GMS certification, low-power signage mode, multilingual UI; 4K@60fps H.265/H.264 hardware decode, efficient 1080p loop playback; LVDS single-channel + MIPI-DSI output, low-power backlight drive; 12V DC input, 10mA standby, 260mA average working load, CoolFlex deep-sleep mode, RTC scheduled wake, hardware watchdog; operating range 0 to 60 degrees C operating, fanless, battery-backed elevator enclosure compatible; board size 100 x 70 mm, 4 mounting holes, slim profile for sealed enclosures; OS option Android 10 GMS with power-optimized CMS agent and OTA updates. Full spec table below.
Published by Wanlin Manufacturing Group (AndroidSBC Brand) | Last updated: August 31, 2026 | Expertise: 15+ years Android board and commercial display manufacturing
ASBC-X9S Technical Specifications
| Parameter | AndroidSBC ASBC-X9S (ultra-low-power signage board) | Industry Average |
|---|---|---|
| SoC platform | Allwinner A133 quad-core Cortex-A53 1.6GHz, 22nm process, PowerVR GE8300 GPU | Legacy dual-core or high-power x86 |
| Operating system | Android 10 with GMS certification, low-power signage mode, multilingual UI | Android 5-7 without GMS |
| Memory / storage | 2GB LPDDR4 + 16GB eMMC (TF expansion) | 1GB RAM, fixed storage |
| Video decode | 4K@60fps H.265/H.264 hardware decode, efficient 1080p loop playback | 1080p software decode, stutters on 4K |
| Display output | LVDS single-channel + MIPI-DSI output, low-power backlight drive | Single HDMI only |
| Touch support | Optional touch, minimal power profile by default | Limited or no touch support |
| USB / serial | 4x USB 2.0 HOST, 1x USB OTG, 2x RS232, 2x TTL, low-power peripheral design | 1-2 USB, no serial |
| Networking | 100M Ethernet RJ45, dual-band 5G WiFi, Bluetooth 4.0, expandable 3G/4G | 100M Ethernet, single-band WiFi |
| Audio | Dual-channel audio out, 2 ohm 5W / 4 ohm 3W speaker driver, 3.5mm headphone jack | No amplifier, external sound card |
| Expansion | GPIO, I2C, SPI, PWM, ADC, IR, battery-backed RTC for scheduled wake | Closed platform, no expansion |
| Power / reliability | 12V DC input, 10mA standby, 260mA average working load, CoolFlex deep-sleep mode, RTC scheduled wake, hardware watchdog | 10-40W continuous draw, no scheduling |
| Operating temperature | 0 to 60 degrees C operating, fanless, battery-backed elevator enclosure compatible | 0-40 C consumer grade, throttles in heat |
| Board dimensions | 100 x 70 mm, 4 mounting holes, slim profile for sealed enclosures | Varies, often larger and heavier |
| OS option | Android 10 GMS with power-optimized CMS agent and OTA updates | Single locked firmware |
| In the box | SBC board, USB-C cable, IR remote, antenna, battery-backed RTC module, quick start card | Board only |
Challenges in Advertising Machine and Display Motherboard Sourcing
| Sourcing challenge | Industry problem | AndroidSBC solution |
|---|---|---|
| No GMS certification | Many budget boards ship without Google Mobile Services, so Play Store apps, YouTube, and Google services fail on deployed displays; retailers reject them in tender review | X9 boards ship with Android 10 GMS certification and Google Play, with kiosk mode, multilingual UI, and commercial license options for retail deployment |
| High power draw and heat | x86 players and oversized boards draw 10-40W, generate heat in sealed advertising enclosures, raise electricity bills, and throttle during summer peaks | Allwinner A133 22nm CoolFlex architecture delivers 15mA standby and 300mA average working load; fanless design runs 7x24 in sealed enclosures without throttling |
| Missing serial peripheral ports | Kiosk and self-service builds need printers, cash drawers, PIN pads, and sensors; boards with one USB port force costly add-on IO boards | 4x USB 2.0, 2x RS232, and 2x TTL ports with level selection and documented wiring, plus GPIO/I2C/SPI/PWM/ADC expansion for custom peripherals |
| CMS and playback lock-in | Closed signage players bind operators to one content platform, blocking migration to Xibo, ScreenCloud, or in-house cloud CMS systems | Standard Android 10 with pre-installed CMS agent support for Xibo, ScreenCloud, NoviSign, and custom cloud CMS; loop, scheduled, and interrupt playback modes included |
| Certification and display mismatch | Boards without LVDS or MIPI outputs cannot drive commercial LCD panels directly, and missing CE/FCC documentation stalls customs and project compliance | LVDS single/dual channel and MIPI-DSI outputs drive 7-32 inch panels directly with backlight PWM control; full CE, FCC, RoHS, and EMC documentation with every order |
X9 Allwinner A133 Commercial Display Motherboard Application Scenarios
| Scenario | Recommended models | Key features |
|---|---|---|
| Advertising machines and digital signage | ASBC-X9, ASBC-X9D (dual display), ASBC-X9N | Loop/scheduled/interrupt playback, 4K H.265 decode, dual-screen extended mode, cloud CMS, scheduled power on/off |
| Digital menu boards and retail displays | ASBC-X9, ASBC-X9T | Daily cloud menu refresh, touch ordering, 7x24 reliability, low power for long store hours |
| Self-service kiosks and ordering terminals | ASBC-X9T, ASBC-X9K | Capacitive/infrared touch, 2x RS232 + 2x TTL for printers, cash drawers, PIN pads, thermal receipt support |
| Elevator, lobby, and building advertising | ASBC-X9, ASBC-X9S (ultra-low-power) | 15mA standby, fanless sealed-enclosure operation, watchdog auto-recovery, remote firmware OTA |
| Face recognition and access control | ASBC-X9T, ASBC-X9K | Camera USB interface, biometric terminal integration, GPIO relay control, visitor management apps |
| Industrial HMI and IoT gateways | ASBC-X9I (wide temperature), ASBC-X9P | GPIO/I2C/SPI/PWM/ADC expansion, 100M Ethernet, 3G/4G module slot, data acquisition apps |
| Medical, education, and transit displays | ASBC-X9M, ASBC-X9, ASBC-X9T | Patient education, interactive whiteboards, wayfinding signage, flight and bus information displays |
Partnership Models for Los Angeles Buyers
1. E-Commerce and Distributor Wholesale
For digital signage distributors, advertising machine resellers, and online sellers in Los Angeles and United States. Volume pricing tiers from 50 units, white label and private label options, dropshipping support, retail-ready packaging, and multi-language documentation.
2. System Integrator and OEM Partnership
For signage integrators, kiosk OEMs, and commercial display manufacturers in Los Angeles. Full BSP/SDK access, custom carrier board design, custom AOSP builds, pre-installed CMS agents and launchers, serial peripheral mapping, CE/FCC/RoHS tender documentation, and dedicated engineering support.
3. Cross-Border Trader and Sourcing Agent Programs
For trading companies, sourcing agents, and import brokers in Los Angeles and United States seeking a reliable Chinese source factory. We provide complete export solutions: EXW, FOB, CIF, and DDP shipping terms, certification packages for customs clearance, FBA and dropshipping logistics, localized documentation, and commission-based or volume-based partnership structures for long-term trade cooperation.
4. Signage Network Operator Programs
For advertising network operators, mall groups, and facility owners in Los Angeles and United States. Fleet-grade board supply, OTA firmware management, custom boot animation, cloud CMS integration, spare parts programs, and long-term supply agreements with scheduled delivery.
Q: Can the ASBC-X9S run Play Store apps and Google services?
A: Yes. The ASBC-X9S ships with Android 10 GMS certification, so Google Play, YouTube, Google Maps, and Play Store apps install and run normally. Kiosk mode, multilingual UI, and commercial license options are available for retail deployments. The default OS option for this article's variant is: Android 10 GMS with power-optimized CMS agent and OTA updates.
Q: Does the X9 board drive commercial LCD panels directly?
A: Yes. The board provides LVDS single/dual channel and MIPI-DSI display outputs with backlight PWM control, driving 7-32 inch panels directly at 50/60Hz, with dual display extended and mirror modes for advertising plus information screens.
Q: What serial and peripheral interfaces are available for kiosk builds?
A: The board provides 4x USB 2.0, 2x RS232, and 2x TTL serial ports with level selection, plus GPIO, I2C, SPI, PWM, ADC, and IR input. Printers, cash drawers, PIN pads, sensors, and face recognition cameras connect without extra IO boards, and a demo test program is included.
Q: What memory and storage configurations are available for the X9 board?
A: Configurations range from 1GB LPDDR4 + 8GB eMMC up to 4GB LPDDR4 + 64GB eMMC with TF card expansion. The featured ASBC-X9S in this article ships with 2GB LPDDR4 + 16GB eMMC. All variants are available with Android 10 GMS, custom AOSP builds, or kiosk mode firmware, with OEM customization from 200 units.
Q: What is the MOQ and delivery time for Los Angeles buyers?
A: MOQ starts at 50 units for wholesale, 200 units for OEM/ODM customization. Standard delivery: 12-15 days. Samples: 3-5 days. Full BSP, SDK, schematics, and certification test reports included. Dropshipping available for e-commerce partners in Los Angeles and United States.
Q: Can trading companies and sourcing agents in Los Angeles work with AndroidSBC?
A: Yes. We are a source factory supporting cross-border traders and import agents with EXW, FOB, CIF, and DDP export terms, complete certification documentation for customs clearance, neutral or custom packaging, and volume-based partnership pricing. We welcome long-term trade cooperation from United States.
Contact AndroidSBC: Start Your X9 Commercial Display Board Wholesale Order
For wholesale pricing, sample requests, OEM customization, BSP/SDK documentation, and partnership discussions in Los Angeles and United States:
- Email: Androidsbc@163.com
- Export Hotline: +8613261677119
- Website: www.androidsbc.com
- Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
